The RB711 is a small CPE type RouterBOARD wireless router with an integrated 2GHz 802.11b/g/n wireless card with prices
$45. RB711 includes RouterOS - the operating system, which can be a router, firewall, bandwidth manager, a CPE and more - all at the same time. This device has one MMCX connector, allowing single chain connectivity. The integrated wireless card is capable of up to 27dBm transmit power output. Built in 16kV ESD protection on RF port.
Specification
- CPU Atheros AR7241 400MHz network processor
- Memory 32MB DDR SDRAM onboard memory
- Boot loader RouterBOOT
- Data storage 128MB onboard NAND memory chip
- Ethernet One 10/100 Mbit/s Fast Ethernet port with Auto-MDI/X
- miniPCI none
- Wireless Built in 2GHz AR9280 802.11b/g/n card, 1x1 MIMO, 1x MMCX connector
- Extras Reset switch, Beeper
- Serial port none
- LEDs Power, NAND activity, 5 user LEDs
- Power options Power over Ethernet: 10..28V DC (except power over datalines). No power jack
- Dimensions 10.5 cm x 10.5 cm (4.13 in x 4.13 in) Weight: 67g
- Power consumption Up to 4.5W at 18V full load (0.245A)
- Operating System MikroTik RouterOS v4, Level3 license
- RX sensitivity 802.11b/g: –92 dBm @ 6Mbps to -75 dBm @ 54 Mbps 802.11n: –92 dBm @ MCS0 to –71 dBm @ MCS7 40MHz
- TX power 802.11b/g: 27dBm @ 6Mbps to 24dBm @ 54 Mbps 802.11n: 27dBm @ MCS0 to 20dBm @ MCS7
- Modulations OFDM: BPSK, QPSK, 16 QAM, 64QAM DSSS: DBPSK, DQPSK, CCK
0 Comment:
Post a Comment